加入購物車成功！
您好！歡迎來到安徽宇新儀表有限公司官方網站
，公司主營產品：碳素廠專用光電熱電偶
咨詢熱線
0550--7768780
聯系我們
- 手機：0550--7768780
- 郵 箱：yangyibiao9988@163.com
- 地 址：安徽省天長市銅城經濟開發區
全國咨詢熱線：0550--7768780
耐火電纜
作者：admin 添加時間：2016-12-20 16:00:54
！">
| 瀏覽： | |
|---|---|
| 添加時間： | 2016-12-20 16:00:54 |
| 推薦度： |  |
耐火電纜的產品詳細介紹：
產品標準
本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產
、美國ICEA標準及日本JIS標準生產
。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用
。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.
使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的***高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（***長持續時間不超過5s）電纜導體***高允許溫度
PVC:導體截面≤300mm2-160℃
導體截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍
，單芯電纜不小于電纜外徑20倍
。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.
上一篇：橡套電纜
下一篇：聚氯乙烯絕緣補償電纜
- 安徽宇新儀表有限公司【官網】 Copyright ?皖I(lǐng)CP備17001118號-1
- 手機：0550--7768780 郵 箱：yangyibiao9988@163.com
- 地 址：安徽省天長市銅城經濟開發區
- 正版建站推廣：千秋在線
- 掃描訪問手機版